• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

production help

  1. Industrial Strength Hole Punch

    I am in the events industry and we print hundreds of booth id signs. We currently use a hole punch to cutout holes on the top left and top right corner of the sign. Right now, I can only hole punch about 10 sheets of 100lb card stock. Is there an industrial strength hole punch that can go...
  2. Cured UV ink scratching off new signs - help!

    So the print shop I work at uses a Canon Arizona 1360GT flatbed UV printer to make large signs on coroplast. I always clean the coroplast with a suggested fingerprint remover formula of 14 oz water, 10 oz of Simple Green and 14oz of denatured alcohol. And I always wait until it's totally dry and...
  3. Issue wet applying clear prints on acrylic.

    I have had this issue quite a bit where the edges look to have had the liquid soak into the adhesive(looks like ghosting?) I’ve tried water with soap (distilled with baby soap). I’ve tried rapid tac and same results. I can usually get about 75% of them and always have to reprint 25% of an...
Top