1324 wiper stuck on new assembly

[Outlawtoaster]

hello I have a vj-1324 and I just installed a new maintenance assembly due to error E082Err Wiper Sns
and now I am getting the same error. It seems to be the wiper is not moving back and forth.
Any help would be great.

 

[Solventinkjet]

There should be two cables that you plugged in when you installed the maintenance station. A lot of people forget to plug in the second cable which is the wiper sensor cable. it plugs into the right back side of the maintenance station and usually takes a pair of tweezers to get in in.