30" window perf

[Tony McD]

Need to quote using perf on an interior door for one way vision purposes.
Looking for a short roll of 30" material to run through the Roland sp300v.
Would need to have a decent life expectancy....3/4 years if possible, just don't want a 1 year product.
Don't think the customer really cares if it's 50/50 or 70/30
Probably won't even laminate it, but may seal it around the edge with clear lam.

Any good leads on perf this size?
Thank you

 

[reQ]

I don't think i ever seen 4 year perf vinyl. All perf material is rated as "promo/temporary" But it does not mean its not going to last if installed properly and not abused to much.
50/50 will be more expensive, 60/40 a bit less expensive

 

[chester215]

I would get it from signs2trade instead of buying a roll.

 

[300mphGraphics]

I wouldn't worry about life expectancy of window perf inside. It will last as long as the people using the door don't put their hands on the window to open and close the door. I use 1 Shot clear acrylic spray to seal and protect. Looks a LOT better than the clear lam tape around the edges.

 

[Tony McD]

Thanks for the help and advise.
Wasn't sure what was out there for product, with new materials always popping up.
I bought a short roll of 50/50 from somewhere a few years ago, and still have a foot or two left, but not enough for this job.
Not sure where it came from...probably lexjet or kapco.

In my search, I found Frank has a 25' roll of 30" solvex which will probably suit my needs, as long as I tell the customer not to expect it to last too long.
I will quote the job using this material.