• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Acrylic sign without standoffs

H

Hoze

New Member
Hey everyone,

I need some advice on hanging a reverse-printed 3/16" clear acrylic sign with a white flood (I'll be outsourcing it from Signs 365). The customer doesn't want to use standoffs, so I was considering VHB tape, but Signs 365 advises against it since it could damage the print.
My thought was to apply white vinyl over the print to protect it and then use VHB tape, but I'm not entirely sure if that’s the best approach. Any suggestions? The sign is a 24x24" circle.

Appreciate any input!
 
Gino

Gino

Premium Subscriber
Ask the customer where he got his hanging instructions ?? Ya do it right.... using physical fasteners or don't do it at all and let him take the chance. That's a lotta weight to count on for tape to hold.
 
Boudica

Boudica

I'm here for Educational Purposes
There are stand offs that grip the edge of the acrylic, instead of going through a pre-drilled hole. We just did a large job and that's what they will use to hang them.
Definitely don't want to put anything adhesive on the back of a reverse print.
 
You must log in or register to reply here.
Top