Chain Link Fence Hardware for Mounting Signs

[SignProPlus-Chip]

Have a job coming up and we need to mount half inch MDO signs that are about 12x18" to chain link fence.

Any specialty hardware that we can use to mount these?

Any help would be great, thanks.

 

[tsgstl]

I have used these, R&J sign supply in St. Louis has them
http://www.safeguardsigns.com/mounting.htm

but honestly sometimes painted short wood slats look just as good
just drill through the face into the 1"x10" slates on the other side of the fence.

 

[TammieH]

Or Bolted Through with large fender washers on back side

 

[Gino]

Fender washers here, too.

 

[Mike Paul]

http://www.hooksandlattice.com/bracket-hardware.html

 

[Mike Paul]

Lots of sign installation brackets here.
http://www.hooksandlattice.com/bracket-hardware.html

 

[Pat Whatley]

http://www.alumapanel.com/view_product.cfm?step=1&lines_ID=635&name=Link-Lip

Clean, professional look and easy to use.