CJV30 Print-Lam then cut help

[Taylor Made Print]

Hello , hope this post finds everyone well!

I may be asking abit much but here goes,

Could somebody who has a mimaki cjv30 post a video on how to set up a cut after a job has been printed and reloaded onto the machine, such as print, then take the material off to laminate then put the material back on to cut.

i use fine cut to put square corner marks onto my jobs when i do print & cut and everything works fine but i have no idea how to cut afterwards.

Sometimes if i print multiple copies of a print & cut job, the machine just wont detect the marks and puts itself back into local mode. i would like to also put the printed job back through and cut that job.

Sorry if this makes no sense but feel free to ask any questions if you require more info.

All the best.

Richard

 

[pinki]

It start with the file. In illustrator or coreldraw i make a square around the image and with the plugin a make the register mark.
Send the file over to rasterlink, on that moment you make choise between print and/or cutting.
In rasterlink you recieve 2 lines, print job and cutting job.
Print the print job, laminaat and put the sheet back in the machine.
Put machine in cutting mode, load the sheet, with the jog keys you
Put the marker on the register mark and detect the first mark.
In rasterlink take the second line and select cut.
Succes

 

[Taylor Made Print]

It start with the file. In illustrator or coreldraw i make a square around the image and with the plugin a make the register mark.
Send the file over to rasterlink, on that moment you make choise between print and/or cutting.
In rasterlink you recieve 2 lines, print job and cutting job.
Print the print job, laminaat and put the sheet back in the machine.
Put machine in cutting mode, load the sheet, with the jog keys you
Put the marker on the register mark and detect the first mark.
In rasterlink take the second line and select cut.
Succes

Thanks for the reply, if you could put this in a video it would be amazing as you've lost me after the applying laminate section.

 

[Taylor Made Print]

IVE DONE IT!

that is so easy to do!

Thanks again!

 

[Stickered Up]

I followed this step by step and it helped me out