Epson s30670. Print on rigid substrate.???????

[lucaslux]

I owned 2 GS6000 and used them to print up to 0.8mm polystyrene 4' x 8' substrates. Have anyone had any experience printing on the s30670, or s50 or s70????.

Thank you.

 

[rjssigns]

See what the manual says. 0.8mm is 0.02032"

 

[fozzie]

See what the manual says. 0.8mm is 0.02032"

+1. We have a 30670. Print on .02 styrene. 4x8 sheets typically. We put a table rear and front for feeding and receiving. Make sure head height is on max.

 

[a77]

pretty cool, I will have to try that with my s30

 

[lucaslux]

+1. We have a 30670. Print on .02 styrene. 4x8 sheets typically. We put a table rear and front for feeding and receiving. Make sure head height is on max.

Great Fozzie. That is exactly how we do it now with our GS6000, I was not sure if we could do the same for the s30670, we are getting it next month.

Thanks again.

 

[mpn]

+1. We have a 30670. Print on .02 styrene. 4x8 sheets typically. We put a table rear and front for feeding and receiving. Make sure head height is on max.

How is the drying time?

I know it's a year old thread & hoping a couple more folks have tried this?