Error e105 Fuse 4 Rockhopper II

[wayaman]

hi everyone my printer recently commented Mutoh Rockhopper II was working perfect, turn off at night and everything right the next day when turned on me a few moments e105 fuse 4 indicates an error, apparently, and I read quite all day this error is very similar to this post

http://www.signs101.com/forums/showthread.php?t=51492

Please help.

 

[randya]

Means that there is a fuse blown for head #4.
There is 1 fuse for each channel, head 4 has 2 channels.

 

[wayaman]

Ok important to review and test every one of the fuses and the only one who had no fuse continuity was 7, now although I would like to know how much replacing the fuse amps.

Attached is a photo of the main board.

 

[wayaman]

....Automated message:

Please observe Signs 101 rules on posting pictures found here
www.signs101.com/forums/showthread.php?t=35000

 

[wayaman]

Already installed and replace the fuse but now gives me a different error, E119 Head 4 Overhead not let me do anything.


Please help!

 

[randya]

Overheat is a head error, typically bad head.

 

[wayaman]

excuse my ignorance but bad head? or dead head? it significant that the head has to be replaced by a new or head these are repairable, I mean has to make some kind of maintenance.

 

[randya]

It the overheat is caused by the head, then the head needs replacing.