• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Found a Downforce and Speed Combination That Works

Speedsterbeast

Speedsterbeast

New Member
I was looking for suggestions on downforce settings for cutting 210 laminated over Oracal 3165 on my Versacamm SP-300V, but was unsuccessful in getting useful info for a starting point.

Well I found a good combo that I wanted to share for future searches.
I've been using 130 grams of downforce at 16 cm/sec cut speed with great results.

If anyone cares.
 
S

splizaat

New Member
WOW sorry I didn't see your other threads or I would have helped you. I usually get away with 120-125 grams as well, but cut at 13 cm/sec and have perfect results....this is with a blade from cleancutblade.com

(This is also on sp-300v)
 
You must log in or register to reply here.
Top