Rusty B
New Member
I recently purchased a used Gerber Edge 1 and it prints awesome other than one important flaw with the reg marks. For starters I use flexicloud and from there I apply a contour and send to production manager. It shows my 4 points in the panel to be printed along with my graphic. The problem is for example the lower right is point 1 and upper right is 2 then 3 in the upper left and 4 in the lower left. Point 3 and 4 never print. However the graphic prints fine along with points 1 and 2. I am almost certain human error is involved and if anyone else has ran across this problem or can lead me in the right direction I would greatly appreciate it. I am losing what hair I have left.