Hello everybody
i'm new entry in this great forum where i found many useful info. I have a problem with my machine. I get the overcurrent message for head when i changed damper on printhead #5 (from left) (probably i touched flat cable) I reset error but still not printing. I tried all usual solutions including change flat cable, Nothing printhead #5 doesn't work. Printhead is OK because i switched #4 with #5 and was OK. I switched flat cable and on # 4 no problem. So problem is only with signal in #5. I heard about fuse, but i don't know where could be and if there is one fuse each Head or one fuse for a group of heads. Any help will be appreciated.
i'm new entry in this great forum where i found many useful info. I have a problem with my machine. I get the overcurrent message for head when i changed damper on printhead #5 (from left) (probably i touched flat cable) I reset error but still not printing. I tried all usual solutions including change flat cable, Nothing printhead #5 doesn't work. Printhead is OK because i switched #4 with #5 and was OK. I switched flat cable and on # 4 no problem. So problem is only with signal in #5. I heard about fuse, but i don't know where could be and if there is one fuse each Head or one fuse for a group of heads. Any help will be appreciated.
