Hp Latex 110 - 17.3:11

[hottscennessey]

Has anyone run into this error?

17.3:11

Remedy:1. Check that the Main PCA to PrintMech black 1 cable is not damaged.
2. Check that the Main PCA to PrintMech black 1 cable is correctly connected to the Main PCA and the PrintMech PCA.
3. Replace the Main PCA to PrintMech black 1 cable.

Can someone point me in the right direction of where to check on this wire?

 

[amw]

Not sure if you saw this thread. It might help.

Need Help - Hp Latex 110 Error 17.0:11

Hey everyone, last week my HP 110 went down with an error 17.0:11 saying reconnect Printmerch to interconnector power. There is little information out there but what I did find was to take the back panel off and clean it out as sometimes it may get dusty and dirty. I did that unplugged it for a...

www.signs101.com

 

[ToTo]

Check wiring in between engine pca (the longest pci card) and printmech pca (behind power supply)

 

[hottscennessey]

We got this error on the 110 today. Did anyone have any luck? I'm planning on trying to reseat it tomorrow when I'm back in.

Edit: wow. I completely didn't notice I was the OP. I guess it just started working because I don't remember this.