HP Latex 700 icc profiles

[tssc]

I have used hp 360 & hp 570 in the past. Both had a profile for Briteline 50/50 window perf. These were available on Grimco & HP cloud. But I cannot find this profile for the hp latex 700. Anyone know where I can get such a profile? (or how to create one like it) Thanks.

 

[balstestrat]

Just take something and try. It's not so cranky about it with the lower temp.

 

[tssc]

I cloned the generic wrap cast profile. Then modified it to increase vac & lower heat. Seems good except the leading edge of perf is curling and raising up to touch the heater before drying. Any other suggestions welcome. Thanks.

 

[balstestrat]

Move it out of the heater before starting the print.

 

[Fechin]

Move it out of the heater before starting the print.

Agreed, have to do that with clear and vehicle films too.

 

[tssc]

Yes this works. I have done this in the past but was thinking the new printer didn't require that. Thanks.

 

[P Wagner]

You should have received a tool in the box with the printer called a Media Feed Tool which helps to resolve lead-edge waste on the 700/ 800 Series. Here is a video tutorial on how to use this tool: