I need a part #

[thesledhead]

We have a 38 Falcon Jr that we just replaced the heads and pump on. I notice the drive gear to the pump is striped out. I am having a hard time getting the part # so I can order it. Can anyone help? Its the shaft with two gears on it that runs to the pump. Thanks, Jeff

 

[MITCHATEXOTIC]

Though more costly I have only seen complete pump assemblies at cmykparts.com(prices?) see my next post

 

[thesledhead]

Though more costly I have only seen complete pump assemblies at cmykparts.com(prices?) see my next post

Well I just bought 750.00 kit from them and would hate to buy another one. I have been trying to get a hold of them all day with no luck. I can order it from Mutoh but I need the part #. I would hate to see this thing dry up again, I need to find one quick.

 

[randya]

I dont believe we have a part# for a separate drive gear.

 

[Jackpine]

I was told that is the only gear not solvent resistant. You will have to get a new pump or the complete maintenance station. They are parts that wear out...

 

[Biker Scout]

Have someone machine you one out of Delrin or other solvent resistant plastic. Once you have one made you can then sell them to other Falcon users.

 

[thesledhead]

I dont believe we have a part# for a separate drive gear.

I was told that is the only gear not solvent resistant. You will have to get a new pump or the complete maintenance station. They are parts that wear out...

Thanks Guys, whats another 4-500 bones in this pos

Have someone machine you one out of Delrin or other solvent resistant plastic. Once you have one made you can then sell them to other Falcon users.

LOL and get into another buisness I dont know anything about LOL

Thanks again

 

[Biker Scout]

No, you just take your messed up gear to a machine shop, let them make them. It might come out way cheaper than the $750 for the whole Kit & Kaboodle.