Christirol
New Member
Hello
I'm new here and already have a big question i did not found an answer to.
So my story is i have a business where i do about 300qm high end Wallpaper per year among other things.
just the wallpaper costs about 80 to 130€/m² , ( 8 to 13$ per square feet.)
I want to expand in this direction and i also want to print it myself, and also sell the wallpaper online and near me.
So i need a printer and maybe also a xy cutter, right?
Through reading i already gained some info.
I dont want to spend extremely much on hardware at the beginning, i dont know how much i need it in the end to be honest.
I already made a setup list, could you please tell me if it is possible to make a good wallapper with this?
Mimaki CJV 150-107 with double cmyk
I would like to get the all in one tool because then i wont need a plotter to also print and cut some decals etc.
The double cmyk because its much faster and longer lasting because of the white tint?
(but white or silver tint also would be awesome when i think about it.)
Cost for a used printer refurbished with new printhead and tint is 5.000€
To cut the wallpaper to get a butt seam i had found an old Fotoba WR55 xy cutter
Is this enough or should i get something different?
Cost for this would be 3.000€
Is it worth it or should i double cut in the wall?
For selling the wallpaper it sure would be a good selling point though.
A summa S120t cannot cut through material to get a seamless wallpaper right?
Are there some special things i have to take in consideration with wallpaper printing?
Cost for beginning about 8k, the blank wallpaper about 0.7 per square feet, printing about 1.50 per square feet.
I want to sell the wallpaper for about 6 bucks per square feet, or 8.50 with install.
So if i print 2000square feet per year it would be a great side business with a good growth ability.
Thanks in advance.
I'm new here and already have a big question i did not found an answer to.
So my story is i have a business where i do about 300qm high end Wallpaper per year among other things.
just the wallpaper costs about 80 to 130€/m² , ( 8 to 13$ per square feet.)
I want to expand in this direction and i also want to print it myself, and also sell the wallpaper online and near me.
So i need a printer and maybe also a xy cutter, right?
Through reading i already gained some info.
I dont want to spend extremely much on hardware at the beginning, i dont know how much i need it in the end to be honest.
I already made a setup list, could you please tell me if it is possible to make a good wallapper with this?
Mimaki CJV 150-107 with double cmyk
I would like to get the all in one tool because then i wont need a plotter to also print and cut some decals etc.
The double cmyk because its much faster and longer lasting because of the white tint?
(but white or silver tint also would be awesome when i think about it.)
Cost for a used printer refurbished with new printhead and tint is 5.000€
To cut the wallpaper to get a butt seam i had found an old Fotoba WR55 xy cutter
Is this enough or should i get something different?
Cost for this would be 3.000€
Is it worth it or should i double cut in the wall?
For selling the wallpaper it sure would be a good selling point though.
A summa S120t cannot cut through material to get a seamless wallpaper right?
Are there some special things i have to take in consideration with wallpaper printing?
Cost for beginning about 8k, the blank wallpaper about 0.7 per square feet, printing about 1.50 per square feet.
I want to sell the wallpaper for about 6 bucks per square feet, or 8.50 with install.
So if i print 2000square feet per year it would be a great side business with a good growth ability.
Thanks in advance.