Here is my situation. I'm printing a ganged design for multiple car decals. After printing I removed media to laminate it. I printed crop marks as well just like if I was cutting immediately after printing. When I mount the material back into the printer/cutter to cut the design I have it in cut mode and use the origin finder to help it find the crop mark, which it does, but the problem is that rasterlink now assumes the origin is the edge of the media and cuts that much off its detection width. Rasterlink then tells me "the cutting job is arranged out of range of the printing area" when I try to Cut Only, but that error should only apply if the crop marks are taken into account for width of the design. While browsing threads someone mentioned being able to disable auto detect so it wont trip the error, but I'm not finding the option to do that in Rasterlink. Any help would be appreciated hopefully asap.
Rasterlink Pro 5
Mimaki CJV 30-130
PS if any clarification is needed just let me know I am sort of rushing this post.
Rasterlink Pro 5
Mimaki CJV 30-130
PS if any clarification is needed just let me know I am sort of rushing this post.