laminator roll counter

[bpp]

Looking for a laminator roll counter. I have a few and need some more. I don't remember where they are from. Something like this but looking more in the $100 range. It's a $30 piece that gets mounted on to a rod with a magnet that holds on to the unit.

Footage Counter (Roll Laminators)

GVDirect (Grand Valley-Direct Inc.) is your source for innovative presentation solutions in the print and educational markets. Uncompromising, industry-respected quality is the foundation of our success. At GVDirect, we help our clients achieve success with global solutions and local enterprise...

www.gvdirect.com

Thanks

 

[DL Signs]

Ready made length counters are costly, and you still have to rig it to the machine.
I'd just go to a hardware store and buy a measuring wheel, take the handle off it and make a mount.

That mount looks like a dime a dozen hinge with a piece of metal screwed to the wheel, just use a magnet instead of the 3 threaded rods. You can get measuring wheels for $30-40, a hinge, magnet, chunk of scrap metal and some screws... Under the $100 limit you want all day long.

 

[JBurton]

That mount looks like a dime a dozen hinge with a piece of metal screwed to the wheel, just use a magnet instead of the 3 threaded rods.

Took me a minute to figure out what it's called, Loc Line, it's what misters lines are made from. Here's an example.

CJT/Locline Switch Mount Duo – CJT Mounting

cjtmounting.com