Looking for a Printing Company Capable of Printing up to 14' Wide Seamless for SEG Frames

[nolanola]

I'm currently searching for a printing company that can handle large-scale seamless printing for SEG (Silicone Edge Graphics) frames, with a maximum print width of up to 14 feet. Any recommendations or referrals would be greatly appreciated!

Looking forward to hearing your suggestions. Thanks in advance!

 

[Zendavor Signs]

14ft x what length? Even if you find someone that can go that large, that could be a difficult install. SEG requires a very precise fit. Signcomp sells a frame that you can install fabric in without the silicone bead. That might be a good fit for such large graphics like this, you have some margin of error. With that said, Indy Imaging and Orbus are a couple of good sources to try.

 

[White Haus]

Similar request the other day, not much in terms of suggestions though: https://www.signs101.com/threads/16ft-wide-dyesub-printed-fabric-vendor.178338/

 

[nolanola]

14ft x what length? Even if you find someone that can go that large, that could be a difficult install. SEG requires a very precise fit. Signcomp sells a frame that you can install fabric in without the silicone bead. That might be a good fit for such large graphics like this, you have some margin of error. With that said, Indy Imaging and Orbus are a couple of good sources to try.

14x25
Thank you.

 

[Rmurray321]

Check out allforsigns.com I know they do custom items and we’ve worked with them a lot. Super good people too!

 

[pjs1831]

catapult signs will do it. We just installed a 20' wide SEG just fine.

 

[10sacer]

Matrix Frame and SEG Systems can do it