Mutoh Falcon Jr.

[whgjettdesigns]

I have a Mutoh Outdoor Falcon Jr. and for some reason when it prints colors it doesnt stay true after say about 6 inches of printing if you are printing red it starts to fade. I just put new ink in it and filled the dampers. Any Idea on what could cause this?

 

[grafixhenk]

Either an air leak in the supply line or a bad damper

 

[Jackpine]

Ink lines and dampers can be replaced by the user. Check the "o" rings on the lines and dampers.

Either an air leak in the supply line or a bad damper

 

[Graphics2u]

Post a close up picture of what it looks like.