New Heads - color profiles not working?

[daenterpri]

I just replaced the heads on my Mutoh Falcon Outdoor last night. Went great! Even updated the head ranks. Also, I adjusted and all the heads seem to be lining up well.

However, now the color profile that I had previously been using for just about everything doesn't seem right. The color comes out too heavy.

Any more adjustments I should have made?

 

[AUTO-FX]

Welcome to the wonderful world of Mutoh.
Experiment with any other profiles you may have until you find what works well. Par for the course.

 

[daenterpri]

Welcome to the wonderful world of Mutoh.
Experiment with any other profiles you may have until you find what works well. Par for the course.

Haha, man, that is so frustrating! I get this thing working well for 2 weeks, then I spend the next 2 weeks fixing... That HP L25500 is sounding better every day! Could probably spend the time selling product to pay for the HP rather than spending the time to fix my Mutoh...

 

[daenterpri]

I've been through almost every profile, and I can't find any that work that well. The main issue is that the grey's have too much of a green tint.

Any ideas?

 

[daenterpri]

I downloaded the 4560GT Profile from Arlons website and it worked amazing!

 

[Stealth Ryder]

Not the Print Head... If you get a good Check Nozzle Pattern, the printer is fine... Check you Color Profile settings... Greys are made from the color K alone, if you are getting anything other that 1% to 100% K (Black) you either have a cross-contamination issue are a incorrect setting thin the Color Management Settings... The Print Head has nothing to do with what you described so long as all the nozzles are firing correctly... It is as simple as that!!!

 

[daenterpri]

Thanks, but the print head was a separate issue. I blew my print heads earlier. This thread was about color profile problems after the print heads were replaced : ) All is well now though : )