we replaced our dx5 head with new head and ribbons,and now we have no print at all.we have checked all 8 fuses on main board ,and all is good we have put a second set of ribbons on head. and still nothing .head is full of ink, changed cr board, just dont know where to look.any help or guidance appreciated. thanks
-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
no print on mutoh 1604 after replacing head
- Thread starter midmoco
- Start date
Solventinkjet
DIY Printer Fixing Guide
Did you test the F2 fuse on the main board? It's smaller than the others. Basically, when ink is definitely in the head and none of the colors fire at all, it's almost a certainty it's the fuse. That being said there are rare cases where the head itself is fried but let's hope that isn't it.
thank you for responding and yes we checked f2 also replaced f2 {just because} we think the head is fried ,but we are not certain,we need a head that has any test nozzles firing so we can see if buying a new head is feasable.