offset question

[signwizz]

i have a roland sp300v and when it cuts its leaving a gap where it isnt cutting what is the best offset for a 45*blade
thanx shane

 

[Mike Paul]

Offset should be 0.25 for the 45deg.
and 0.50 for the 60 deg.

 

[Pacific Coast Sign]

Also....check your cut strip - may need replacing.

 

[DRamm76]

Take the blade out of the blade holder and drop a little WD40 in there..VERY LITTLE..let it dry over night..then take an air can and blow it out..pop the blade back in and you're all set