• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Prints coming up short

L

LenXIII

New Member
I seem to lose 1" for every 8 feet printed, on any material. I adjust my micro page feed per material for print quality, but I seem to always lose that inch! This is a problem now. What all sort of tests can I try, or what should I check to adjust this problem?

I have a 1614 and I use the mutoh flexi rip.
 
bob

bob

It's better to have two hands than one glove.
LenXIII said:
I seem to lose 1" for every 8 feet printed, on any material. I adjust my micro page feed per material for print quality, but I seem to always lose that inch! This is a problem now. What all sort of tests can I try, or what should I check to adjust this problem?

I have a 1614 and I use the mutoh flexi rip.
Click to expand...

Set the Output Size Compensation in Production Manager by select the setup and do Setup->Output Size Compensation...
 
You must log in or register to reply here.
Top