Question Prints have “overspray”

[Jharris81]

So everything has what I call overspray around everything. Is this normal, old heads, just how it is?

Sent from my iPhone using Tapatalk

 

[FrankW]

Check the head height.

 

[rjssigns]

Clean the encoder strip then try it.

 

[Jharris81]

It is set at high.


Sent from my iPhone using Tapatalk

 

[mcclaysign]

Lower the head then, if it is too high the static will pull the ink.

 

[Jharris81]

Lower the head then, if it is too high the static will pull the ink.

Boom! Problem fixed! Thank you so much.


Sent from my iPhone using Tapatalk

 

[jcskikus]

Just a heads up: if it does it again and the head is set low, as RJSSigns posted before, clean your encoder strip. It's a known problem with Rolands.

 

[mkmie]

1)Drop head height
2)Add a humidifier
3)Clean encoder strip

 

[Jharris81]

I will look up how to clean the encoder and probably do that as well.


Sent from my iPhone using Tapatalk