Question onIJ35c

[GAC05]

Hi,
anyone know if IJ35c can be easily removed after 30 days of outside exposure?
It will be on painted(?) aluminum cladding.
I have a promo that will run for December and can't get material with removable adhesive in on time.
I've pulled IJ35 off other projects before but it had been up at least 6 months and some of the glue separated from the vinyl.

Thanks
Wayne

 

[CanuckSigns]

Hi,
anyone know if IJ35c can be easily removed after 30 days of outside exposure?
It will be on painted(?) aluminum cladding.
I have a promo that will run for December and can't get material with removable adhesive in on time.
I've pulled IJ35 off other projects before but it had been up at least 6 months and some of the glue separated from the vinyl.

Thanks
Wayne

I doubt it, especially in your climate, this time of year over here nothing will stick outside lol!

I remember reading on here about some one wiping the substrate with something to make the vinyl not bond properly, baby powder, or something not quite sure, might want to do a search.

Depending on if the job is panelled or not, you could try cutting away 2-3" of the backer paper around the perimeter of the vinyl and just sticking that down. These are all hillbilly engineering so feel free to ignore them completely