Rasterlink 6 v 7

[WBS]

Running both of these on separate PC but trying to get same profiles, trying to print same colour on jv300plus as jv330, need to print old images on new printer but can not, any ideas

jv330 and 300 running same inks

jv330 much more vibrant, as it should be but need to match some old prints, is it possible, and no I can not just print on old machine as we are replacing this soon with another 330 so wont have that option
Any Ideas
Ian

 

[FrankW]

The same profiles on different printers don´t result automatically in same colours.

When profiling for Rasterlink, there is functionality to emulate one printer on another in Mimaki Profile Master 3 (MPM3). You need to print a swatch on the JV300 and scan it to recognize the gamut of that printer, and create a printer profile for the JV330. Then you can set Rasterlink 7 in an emulation mode.

 

[WBS]

The same profiles on different printers don´t result automatically in same colours.

When profiling for Rasterlink, there is functionality to emulate one printer on another in Mimaki Profile Master 3 (MPM3). You need to print a swatch on the JV300 and scan it to recognize the gamut of that printer, and create a printer profile for the JV330. Then you can set Rasterlink 7 in an emulation mode.

Not seen emulation mode on rasterlink will have a look in morning Thanks

 

[WBS]

The same profiles on different printers don´t result automatically in same colours.

When profiling for Rasterlink, there is functionality to emulate one printer on another in Mimaki Profile Master 3 (MPM3). You need to print a swatch on the JV300 and scan it to recognize the gamut of that printer, and create a printer profile for the JV330. Then you can set Rasterlink 7 in an emulation mode.

Not seen emulation mode on rasterlink will have a look in morning Thanks

 

[WBS]

The same profiles on different printers don´t result automatically in same colours.

When profiling for Rasterlink, there is functionality to emulate one printer on another in Mimaki Profile Master 3 (MPM3). You need to print a swatch on the JV300 and scan it to recognize the gamut of that printer, and create a printer profile for the JV330. Then you can set Rasterlink 7 in an emulation mode.

Not seen emulation mode on rasterlink will have a look in morning Thanks