• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Translucent vinyl lifting around panel edges

G

Greg Ghezzi

New Member
We installed translucent vinyl on new lexan panels about 6 months ago and noticed recently that the vinyl is bubbling up and lifting around the edges on the panels. We used Orafal's 8500 series translucent vinyl, wet installed the vinyl on the panels and trimmed the edges back about 1/4". The panels sat in our facility for about a week before they were installed on the lightbox. What would cause the vinyl to bubble up and lift around the edges shown in the pictures?
 

Attachments

  • PXL_20230913_113229324.jpg
    PXL_20230913_113229324.jpg
    1.1 MB · Views: 88
  • PXL_20230913_113412989.jpg
    PXL_20230913_113412989.jpg
    552.9 KB · Views: 65
  • PXL_20230913_113359162.jpg
    PXL_20230913_113359162.jpg
    462.7 KB · Views: 75
  • PXL_20230913_113258939.jpg
    PXL_20230913_113258939.jpg
    1.2 MB · Views: 60
D

DChorbowski

Pixel Pusher
It appears the retainer angle may be causing it as it looks like its being pulled in one direction. Perhaps its due to thermal expansion and contraction of the plastic vs aluminum? Or when they cranked down the screws it pulled on the vinyl?
 
You must log in or register to reply here.
Top