UCJV330 + RL7 - Space between jobs

[dinomaskot]

Anyway to reduce space between jobs?
I've changed from intermittent to continous on the UCJV and that doesnt seem to do anything..

 

[Smoke_Jaguar]

Put the art all in one file is about the only way I know how to reliably do that.

 

[Solventinkjet]

Yeah, it's in the firmware and not user or tech changeable.

 

[Smoke_Jaguar]

When Rasterlink creates the raw data file for the printer, it does it there. Basically, a bunch of nerd stuff, and I sure as heck ain't going to try and teach folks how to do it. Playing with the raw print data is a recipe for disaster, even if you have a good idea what's going on.

 

[Goatshaver]

This is why I've just stuck to sheets. Print one and roll the leading edge back to the platen and start the next print.

 

[Kemik]

Anyway to reduce space between jobs?
I've changed from intermittent to continous on the UCJV and that doesnt seem to do anything..

Are you sheeting after every print, or do you just mean the space between prints?
Coming from a previous Roland user, the space between prints on the Mimaki was annoying at first, but I've learned to live with it!