I am looking into buying a used Mutoh VJ1204 with takeup reel in nice shape. If I do make the move I am considering upgrading my FC7000-75 w/ARMS to a larger plotter to work with the printer.
So here's my problem, My Graphtec has been treating me perfectly for the last 3-4 years. What I would like to know is for a print and cut setup which cutter would you suggest? I us Signlab 9.1 Print and Cut. I am looking at Summa, Graphtec, and Mutoh Kona. I have never done any contour cutting to this point but have used both Graphtec and the Summa but never a Mutoh Kona. Any help as to why or why not to choose one of these cutters is appreciated
So here's my problem, My Graphtec has been treating me perfectly for the last 3-4 years. What I would like to know is for a print and cut setup which cutter would you suggest? I us Signlab 9.1 Print and Cut. I am looking at Summa, Graphtec, and Mutoh Kona. I have never done any contour cutting to this point but have used both Graphtec and the Summa but never a Mutoh Kona. Any help as to why or why not to choose one of these cutters is appreciated