video of fault vj 628 can you help

[thesignworks]

when doing cr carriage move for maintenance it goes over
I think its the paper sensor
or is it encoder strip or encoder densor
its really clean the strip machine like new

 

[thesignworks]

could it be it had cleaning carts in it and it was shut down before they all did the do?

 

[Notnormal]

if your ink is empty it does that. also check your paper sensor behind the rollers on top. the beeping means fault usually ink.

 

[thesignworks]

the rear paper sensor is ok as you can hear the fan come on

 

[thesignworks]

you mean the movement if no ink?

 

[Notnormal]

the fan comes on even if nothing is loaded.

 

[thesignworks]

so really its just one bad cart so I then will not measure the media
so its not busted.

 

[Notnormal]

Pulled a black to show

 

[thesignworks]

holy cripes you're not -normal !!!
thanks and kindness
relief
thank you
are your cards type 1 or 2?

 

[Notnormal]

that I do not know. they are just the regular 220ml mutoh inks with the cards attached

 

[thesignworks]

hello - good news I fitted a black chip card and it works
I fixed the snapped pins on my cap station and it works

THEN
NO media
from the vj status monitor
media is loaded
the only thing I have done is fill the cap with solvent
I printed a test print with no ink coming out twice
one of the black channels started to come back on the test print
then
no media - won't initialise
kind of does what it did in the first vid

 

[Notnormal]

are you using atleast 10in wide media all the way on the right side of the machine?