Question Wiper error

[Jaime IL]

I have recently replaced maintenance station, print head & wiper blade, but every morning when arriving to work my Mutoh Valuejet 1324 is beeping with the wiper err. I am not sure what else to do, any suggestions?

 

[unclebun]

Check to see if the error means the wiper can't move properly. If the rail it moves on gets inked up, it might give an alarm because movement is restricted.

 

[Jaime IL]

Check to see if the error means the wiper can't move properly. If the rail it moves on gets inked up, it might give an alarm because movement is restricted.

I gave it a good cleaning yesterday when changed out the wiper blade, I didn't see anything blocking the track but is it way down in the depths or somewhere noticeable that might be stopping it?

 

[Umca]

Check the wire from sensor. It may be you fix it while replacing the maintenance station.

 

[Jaime IL]

Check the wire from sensor. It may be you fix it while replacing the maintenance station.

Where is the wire from the sensor exactly? It has been fine now for a while but it's doing it again and everything is clean