Wiper not working

[No Rules]

Just replace capping station it was working fine now all of a sudden wiper quit working any help would be appreciated

 

[No Rules]

It is a falcon outdoor jr

 

[packman]

you may have broken a little piece of plastic that comes from the wiper arm to the white cog on the pump when you removed it.

 

[AUTO-FX]

Ink can get down into the groove where the holder for the wiper moves back and forth. Cleaning fluid can re-activate old ink residue down in there as well, and then it's like glue. Clean the groove thoroughly and see if it frees up.

 

[Finishline Signs]

Ink can get down into the groove where the holder for the wiper moves back and forth. Cleaning fluid can re-activate old ink residue down in there as well, and then it's like glue. Clean the groove thoroughly and see if it frees up.

+1 This is usually what messes mine up. You can take the slider arm apart easily and clean it up.

 

[laserman70]

could be losing vacuum from the pump. Check the lines to make sure they are on good.
We ended up replacing our pump in the end.

 

[SlightlyChilled]

Re seed the wiper blade it may look in but is fanning out on the bottom. Does it look like it tries to move but cant?

 

[SlightlyChilled]

looks like we will never know if he fixed it or not