TheFreshPrints
New Member
Hi all, this is my first post so greetings from Michigan!
I have a Roland xc-540 that I recently replaced then scan motor on. The carriage has started to shift further and further left while scanning until it is hitting the end of the printer. I have verified that this is not an encoder issue and I have repeatedly done the limit initialization. The only error code it is continuing to throw is 0102 head lock sensor. I do not see this being related as during a sensor check the head lock seems to operate properly.
I'm rather stumped on this one so any input or suggestions would be greatly appreciated!
-TheFreshPrints
I have a Roland xc-540 that I recently replaced then scan motor on. The carriage has started to shift further and further left while scanning until it is hitting the end of the printer. I have verified that this is not an encoder issue and I have repeatedly done the limit initialization. The only error code it is continuing to throw is 0102 head lock sensor. I do not see this being related as during a sensor check the head lock seems to operate properly.
I'm rather stumped on this one so any input or suggestions would be greatly appreciated!
-TheFreshPrints