Search results

We have used nothing but factory ink for the life of this machine.

Yeah in the maintenace manual it say to losen the 2 tilt mounting screws and then turn the tilt adjusting screw according to the tilt direction....haha. After you do a print of ( from the pdf) #ADJUST-HEAD ADJUST-SLANT adjust-720 4 PASS. But nowhere does it say where that screw is in the pdf...

Good question and I have no idea..... Let me see if I can figure that out.

Thanks for the info by the way

I will die if its a print head! This print head is only 6 months old and not a scratch on it. Im doing a nozzle wash right now...... Very frustrating! This is the first time ever seeing the overspray and we have had the machine for + or - 10 years now.

Ok so am I turning the black screw in front of the head unit? after I losen the 2 allen screws. Here is a pic of what it looks like right now. It looks like it just printing slanted.

Ok this has not been my month. Ive seen another thread with this problem but never really got what the problem was. The cyan head is spraying overspray everywhere. Looks worse in person. Where do I go from here. Thanks!

I need to adjust the slant on two of my heads that were taken out and put back in. So what screw manually adjust this? Thier maintenace guide tells you how to do the print but not actually adjust it!?

So basically when I do a test print the magenta is printing over the black a little. I need to manually adjust the print head from left to right. Ive printed out all the test prints and Im just not sure where I adjust this and the head is also printing slanted. Thanks I reread my post before...

OK! I got magenta to the head and its firing. I pulled it through with a syringe like you suggested and seems to be working.... Clog? Ok so through all this I have removed the cyan and megenta heads and prints are not looking good. How do I adjust the slant on the heads? I have it in the #Adjust...

Ok installed a new capping station that tubelite sent over. I realigned the capping station and I checked the caps to make sure thier capping like you suggested. I also switched lines on the pump and still no magenta? Do you have any idea where to go from here? I really appreciate your help, we...

Ok so thanks for the tips and Im bad at responding..... So here is were I am. Still have no magenata so I was looking at the capping station which is brand new. I noticed there was ink around the top of the cap or right below the rubber boot. So I pulled the line from the pump and there is no...

So I thought I lost me cyan head. I decided to pull it and really check it out, there was not a scratch on it. So i soaked it and installed it and to my suprise it came back. Earlier in the day I installed a new capping station also. So here is the "go figure" part. I start a print and now my...

Thanks Guys Ill give those options a try......Basically I was out of town and a job was trying to be printed and the wiper jammed. Not knowing how to fix it the machine was left. I get back and printheads and capping station is dry as a bone and print heads were not firing except the cyan...

If you had to guess what do you think the problem is? Long story on what happened but this is what were dealing with. Clogged Head? Head Strike? :thankyou:

Thats what just popped up on my JV3 160SP Ive never seen this. Now what?

We use the exact same for the applications you use except the wrap material we use 180v3 3M with Oraguard 290 laminate

We have an ELITE 62dhr (Biggest P.O.S.). But im stuck with it and you have to baby it like its a 6 month old baby.

Dang!!!! I love corndogs too....

I sent it to him to let him know where I had got with it so far and if he liked the direction of the design. He loved it and said dont change....Also i was running into a brain block and was gonna maybe start changing things up cause was wondering if I liked it anymore...haha.