• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

OCE Arizona 480GT help

I

IronEagle

New Member
We received an older OCE Arizona 480GT(early 2000's model) for free that was printing the day we received it. The bad was that it had to be removed from the building it was in by midnight that day(about a 5 hour span). It has been sitting in storage for about a month now and we are about ready to move it in to its new building, does anyone know what we are going to need to clean it out and restart it?
 
A

AlsEU

New Member
If the inks were not removed for storage, you will probably have to replace the ink filters and then check, how the ink system works. Also check BEFORE you move the printer, if the carriage and gantry are secured (gantry to the table, carriage to the gantry). The worst case is that some heads and ink pumps will have to be replaced, but without a check it's just a guess.
 
You must log in or register to reply here.
Top