sierragirl78
Printer, Cutter, Web Designer, Graphic Designer
I've been hunting around for a plotter that can cut at least up to 30 mil 46" wide semi-rigid plastic non-adhesive sheets without reg marks and doesn't screw up very often.
My budget is a max of $600 and I don't mind it being slightly used. I would run it off a Windows 10 laptop and hopefully it can tie into Illustrator CS5 or have its own not very complicated rip/print software.
Do you have any suggestions of what I can use?
Also, does anyone know of a decent place to source 10, 15, 20, and 30 mil white matte/matte, matte/gloss, and gloss/gloss sheets? As long as possible, preferably at least 8 foot.
Thanks!
My budget is a max of $600 and I don't mind it being slightly used. I would run it off a Windows 10 laptop and hopefully it can tie into Illustrator CS5 or have its own not very complicated rip/print software.
Do you have any suggestions of what I can use?
Also, does anyone know of a decent place to source 10, 15, 20, and 30 mil white matte/matte, matte/gloss, and gloss/gloss sheets? As long as possible, preferably at least 8 foot.
Thanks!