• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Roland SP-540v onto Onyx Cut Server

A

antdev

New Member
Hello, i am hoping someone can guide me in the right direction.

I have a HP Latex 330 and SP-540v. Currently we print on the HP through Onyx then Cut on the SP540v through versacamm. We have and issues with the cut paths going and and cutting into the artwork and so on. We want to set the SP-540v onto our onyx cut server so we can streamline it and go through one RIP as we think this may solve our problem.

However, we have the SP540v set up on the onyx but our PORT configuration does not seem to be right and that is where are stuck.

We have a 5 port switch, 1.HP 2.SP540V 3.HP Comp 4.SP-540V comp.

Im sure its all the networking i am having trouble with, but I am stumped!

Any ideas on how to set this up...? Any help would be appreciated.

Thanks,
Paul
 
balstestrat

balstestrat

Problem Solver
Just set the IP you have on the printer to cutserver. Nothing else needed.

I will however tell you, roland printers as cutters are pain in the ass...
 
A

antdev

New Member
balstestrat said:
Just set the IP you have on the printer to cutserver. Nothing else needed.

I will however tell you, roland printers as cutters are pain in the ***...
Click to expand...
Aye, but we are struggling with the part. I think awe have identified the ip but what port does it need to be?
 
You must log in or register to reply here.
Top