Recent content by adsababy

As Solventinkjet has said, never use water with air free products, dry install only

Looks similar but I am trying to work out it the patches are running in the print direction? it looks like they are not. If that is the case I think it is the material, have you tried another material to compare? FYI my issue was resolved by the engineer re calibrating the heads as they were out...

Yep hindsight is great isn't it, 2 months out of warranty on a 12 month machine costing 22k I would expect better. I would love to fix it myself but without a detailed service manual it's not something I would tackle, do you have any documentation that could help?

Thanks, I will have to get the engineer to do the work as I have no idea how to do this and risk damaging the machine, looks like its going to get pricey

Ok, so the engineer has just left without a fix. He performed an air purge and said that there was excess air in the head. He tested the negative and positive pressure and the positive pressure was set too high, he readjusted it to the correct setting but when testing, the machine errors 'not...

I think I can discount the buckling as it only shows in certain colours, I have an engineer out on Wednesday so I will report back findings and also nudge him to look at what you have mentioned, thanks for the info, really appreciate it.

Thanks for the info, I am hoping it wont be a long process to fix it as it is now out of warranty, as Solventinkjet has said, it seems to be linked to positive and negative pressure. I have an engineer out on Wednesday so will report back on progress. Be very interested to hear back if you get...

Did you manage to find out what was causing it?

What could be the cause if it is media related? It happens on at least three different materials and although you cant see on the photo there is a colour difference, i.e less cyan in the patchy parts.

Thanks so much, I will try and get hold of the manual and report back what I find

Interesting because I have also had errors relating to negative and positive pressure, problem is that I have no idea how to adjust this. I cant see air as the tube is so dark with ink, it's not easy to tell so I just do at least two purges per ink.

Hi, the nozzle check is fine, at first I thought this too but all looks ok

Hi, hoping someone can help I have a Mimaki UCJV 300-160 and am now seeing patchy prints, especially noticeable on block colours, mainly darker blues (always the worst flat colour). I have had the Air Purge error come up quite often so have gone through the process but it still reappears. The...

Edwardian Script

This is a great tool, I use it all of the time. Just upload the image and it will recognise most fonts. https://www.myfonts.com/WhatTheFont/