Recent content by Koksan

I just tried it. I set two squares 1 cm in a distance of 1000 mm from one another. The print was exactly 1000 mm, but the cut was 1003

That's the only way I am print-cutting for the last few months. Still some discrepancy, but it's better than the common print-cut option. I found and bought an SP 300V with old printheads (that I don't need) for around $200. It will be shopped within days - its in my country, so shipping will...

Sorry for the late answer. I tought it might be the cable and replaced it with new, the problem remained. As you mentioned - doesn't really seem to be a software problem since menu settings does not change anything, so I agree with the hardware suggestion.

2 months later and I still have this issue unsolved. Any other Roland forums where I can ask for help?

yeah, this was one of the first things I tried, remember having the same issues years before too on another Roland, but turned out one of the lock's screws was unscrewed and prevented locking so the head and the cut cartridge to separate, which obv. leads to the 106 error. Unfortunately this...

I have noticed that I often have the service call 0106 lately and I connect it with the print/cut problem. The small white teflon piece (printhead lock) is new - replaced, the encoder as well I do the ENV match everytime in order to fix it, but sometimes this doesnt do the job from the first...

Sounds absolutely logical, I was thinking about changing them soon anyway. Apparently the time has come, hopefully it turns out to be them and to solve my problem. Thank your the advice, I will order new ones today and will see if things goes well. I will update here for the result in both cases

I tried both

I have, yes. I also did the Env. Match many times, but this didn't changed anything. I am starting to tnink about physical problem with the printer, but nothing looks damaged or worn out

So, no help at all?

good Idea, will try it in a minute Ok, so the test I made was with two equal squares that I placed with 1000 mm between them. After the print-cut test I see that the squares are with a 998 mm distance, and the cut is 1000. Any ideas what could cause this, encoder is new, he old had the samoe...

Thank you for the youtube link, but unfortunately I tried this many times and it didn't fixed anything

Hello, after few years of using Roland sp540 V I have this issue that I am strugling with and I cannot fix. For few weeks now when I try to print - cut stickers, the cut in the right site is perfect, but the cut in left side is about 5 mm to the left of the image. I know its not from the encoder...