Recent content by natallica

Yeah, it's a little tough to get the tool directly over a good spot. I usually do a couple of readings while slightly moving around the area to hone it in as best as I can. You'l know when you're way off base because it will even show a wierd sample in the app. Just ignore that one, scoot it...

It's called Color Muse, a small USB chargable bluetooth device available on Amazon (for about $60). It's about the size of a size C battery. It is used for taking color samples and matches measurements with many databases (i.e Sherwin Williams/Baer/Avery/Pantone etc.). When comparing samples the...

It may be, but I'd assumed in my case, the linearization chart is CMYK only, and having a 9 color printer it would help during the 'total' ink limit step as well. I've read that for these Epsons (80600's) to achieve great results you have to only build a CMYK ONLY profile and 'Precision Dot'...

Useless because?

Printing these in the gutter does 2 things. • One, it keeps some of the nozzles from drying out during passes when it's not 'calling' for a specific color. We do a lot of vehicle wraps and printing solid blocks of color, and it's useful when there is upcoming text or images in the file and the...

Reaching out, hopefully someone knows...It's a nit-picky thing, but I'd love to fix it. We have 2 of these printers and there are NO options on the printer panel to add these to each job so we've been using Flexi to add them (using 'Print Color Bar' option). While it DOES add a 4 color stripe...

Anyone have one for the 80600 or 80600L?

When you highlight/select a Job and hit the Rip & Print (Ctrl+H) icon in the toolbar(not the desktop print icon). When window pops up, the selections are in a pull-down at the top right of that window. -N8

We use 230 a great deal, however conforming around rivets isn't very conducive. They'll pop back up in a few minutes. It's good for some stuff (although 231 laminate sucks, nowhere near glossy enough IMO). I'd go with WrapCast, that should work fine...my 'go-to' for most projects. -N8

Yes, there is a selection in the top of the 'Rip&Print' dialog box tab to the right is the Cutter Settings tab, pulling down the arrow allows for sending 'Contour Job Only' Hope this helps! -N8

There is a technique I learned at an SGIA Color Management class that has helped me out immensely. I wanted to take the 'visual' ink limit check out of my process, and actually SEE via readings how to get my ink limits perfect and here's what I was instructed to do. • Be sure 'NO COLOR...

This is probably going to sound retarded, but I'm going for it regardless. • Flexi 22 (Subscription) • 2 Epson's (80600/80600L) • Summa S2160 OPOSCAM/using Cutter Control (5.12.02) I prefer sending my Print/Cut jobs at the same time to Production Manager with barcodes, and I like to have the...

Hey guys, every once-in-a-while when cutting a job I'll run into a situation where the machine needs 'human assistance' to help locating the marker on certain materials. I understand you'll have to recenter the knife over the mark, press OK, and away she goes (even though the cut can be off a...

I'm assuming so, the ones I took off of the hose ends were very small and thin, the one on the printhead was the larger/thicker type. Are they all supposed to be the same size? If so, how many are in each line?

Can anyone give me an idea on where (in the ink line) the o-ring locations are? I have a digital and printed copy of the manual, but I can't seem to pinpoint where they are. Doesn't seem to specify. I'm assuming: One on printhead top, one in the end near the pump. Are there others? Thanks, -N8