Recent content by Phenex

Just wanted to thank everyone for their insight and help!

Just to be clear, the vinyl never separated. It is still firmly attached to the magnet.

Not to derail my own thread - Thanks. I was looking at this too - Xpert Sign Tools | Xpert Notcher & Hole Punch, Of course, you need a press to go with it. Glad to know short term, I can raid my wife's crafting tools!

Thanks for the replies. A couple of comments to the replies: VanderJ - The rolls of magnetic material at the shop are stored on end, when received from the supplier they were in a box with the normal standoffs. When I cut them from the roll, I did not see any deformation. Still a...

Hi All, Having problems with some magnets I made for a customer. I have attached pictures, blocking out the customer name to protect the innocent. Some info about the magnets (set of 3 magnets) · Magnum Magnetics – 30 mils · Full bleed print · Printed on Arlon DPF...

Gentleman, My thanks to you both!

Working on creating some signs for a client and they want me to match these fonts. Have had no luck with the online matchers. Looking for some help from folks here. Thanks in advance for the help!

I use Versaworks. I would use the variable data feature, after putting the data from Excel in the right format.I haven't done it for 900 hundred items, but have done it for over 100. As mentioned earlier, the hardest part was reading up on how to use the variable data, real easy after that.

While not perhaps ideal, Illustrator does have the capability of using variable data. You could set up the list of numbers you need using Excel or Google Docs and then feed it into Illustrator.

Thanks Fred!

Need a little help with this font. Looks similar to Baskerville to me. Thanks

Same here. All our equipment has a UPS. Those that don't, are surge protected. The UPS is nice because it smooths out the power going to the machines. Cost of the UPS is minimal compared to the cost to repair. My 2 cents.

I tried a half sheet this morning with all on strong and it worked fine. I'll try again with the 2 outside on strong and middle roller on medium. Thanks everyone.

Thanks guys. I confirmed I had ARMS paper weight on. I'll print/lam again and set the rollers to strong and let everyone know what happens. I appreciate the responses.

Hi All, Just got my Big Squeegee and finally got the technique down. Pretty happy about that. Since that part of the process worked, I went to perf cut out some decals that were laminated. When cut, they were all off about 1/4" in the x-axis. Noticed this on a couple of sheets. The...