Recent content by psychopat

The rubber band did the trick for me, but I contacted Royal Sovereign and they also sent me (for free) thicker rubbers to put on the roll instead of the original ones. So that permanently fixed the issue and its much easier than using rubber band as they always rolled when I was trying to put...

Will try that, thanks for the tip. I also contacted RS and they will be sending me thicker rubber (under warranty) so it should work better than the rubber band. They tend to move when you put the roll on.

Awesome! I added a few rubber bands on the spindle and put the roll back and I think it did the trick. I was able to put more tension, the film peel off right at the bar now and no wrinkles! Probably still need minor adjustments, but it's already working a lot better. I thought most of the...

ok thanks I think I found the problem, the film roll seems to slip on top of the laminator roll insert (metal with rubber stripes).So no matter how much tension I set it at is ignored. I am using a standard roll, is there any sort of adjustments that needs to be done on those aluminum...

It does almost seem like the take up roll doesnt spin fast enough since the film always seems to go up. Does the tension on the take up roll control the speed too usually? or its just adding tension? Thanks

That's true, but they charged over 300$ to assemble it and do a quick training. Assembly took 15 mins and was mostly setting up the stand. I watched a bunch of videos prior and I figured it cant be that hard to load it up and laminate. I was thinking, the problem must be relating to a tension...

Hey guys, I recently purchased a VS-300 printer, along with a brand new laminator from Grimco. It's a 32" Cold Pressure Sensitive Roll Laminator RSC820CLS. I do mostly promotional item for our company, stickers etc. and as well as video game arcade restoration projects. I am using Oraguard...

here's also a scan of different prints of the same color test. See how the gray changed from the old print to the new one (pink tint). This is from the same exact Versawork job.

Hey guys, I purchased a used Roland VS-300 printer recently. I work in the video game business and I am familiar with the design side (using the Adobe suite). Was planning to use it for promotional material and video game arcade projects / restoration. Initially when I first used the...