Recent content by Ravni

Thanks for you reply i Will try working with the profiles as you tould me. i Will try to fill the dampers this Way and see if this works, hope so are the jv33 and cjv30 the same printer only the cutter in differens? Have an other question i Got rasterlink 3 with the Printer is that ok or...

Thank you for all the help, i Will try to do the slant adjustment and maybe an drop pos again. I Will Get back with My results

I have also tryed the unidirectional but the print looks the same, the head is all ready at the lowest point Right now. The head remplaceret manual i Got with the head it days that i need to do a slant adjustment but i read in an other thread that i need a microscope for that adjustment, Can it...

now im trying to print the RIP ME.eps file form the rasterlink 3 cd using a trial version of rasterlink pro 5 sg my settings is as showed in the the image. and the 3 heat element are all set to 35 now the result is much better but not as good as it shut be for this printer the media i use is...

Thanks guys Will try et as soon as i arrived at My office:) pass count? The time it takes to print??o dont know

i bought this machine because i want to make this in to a living together with my LED sign business, so my plan is not to stay as a hobbyist. i see what you mean about the panic i bring in this question, but i already got 10 jobs waiting so really need to get it working if i want to keep this...

gregwallace - i appreciate your help and i will try that what about the last heat element?

i'm an eletronic engineer but had a hobby as a designer, so i bought this printer from an auction and have never worked with printer setup. so sorry if i ask stupid questions, but i bought the printer found that the head was broke then replace it with new parts. the heat is set to 27 degrees...

just tryed an other print still look the same :/

Nozzle test, is that the normal test print? prime? Do you mean manual filing? My main problem is the print quality.

no respons?? really need this printer to run ASAP

hey, i just installed a new original head in my mimaki jv33 160 at the same time i installed new dampers , new pump and new cap. but the damper wornt fill with ink only a small amount (is that right)? and then the printing quality is very very poor not acceptable at all, look at my attachment...

hi I'm pretty new to this industry i have a mimaki jv33 160 printer with a ink bulk system using ss21 ink from c-m-y-k.com one of my customers asking if i can print posters (like movie posters) don one of you guys know if this is possible?

hey is it possible to have a reupload?

now i think i have found the problem. i unscrewed all the covers from the printer and i see the some of the yellow ink have been running on the outside of the tube and down to the flat 30 pin ribbon cable which is going from the main board to the board behind the inks where the 2 sensors are...