Recent content by rodrigo_toledo

Hi, I would like the Mimaki JV33 160 BS3 driver for the Wasatch 6.0 installation, could anyone help me?

good night, someone could help me align the head to the cap JV33 Mimaki, I find that it is very right when you stop to do the cleaning during printing. where do I find this information in the manual? or if someone has a youtube link to send. sending photos thank you

friends, my JV33 suddenly let out ink. I was printing and had to turn off the printer when I called again and was making an impression not out anything. she calls normally, but does not inject ink. can anybody help me? Important: it had shown an error 120 (low temperature) and error 121 (high...

Anyone know where I can buy the card connector mother with the flat cable of the ink slider boader. I put a picture with the connector selected in red and what is the name and model it to search the net?

I was with this problem recently, I JV33-160. second technical manual: 1. Check the head memory cable 2. replace the headmemory 3. replace the ink slider pcb assy 4. replace the ma pcb ssy 1 to 3 tests, not changed the mother board, so managed to solve the replacement of the flat cable of...

good evening! I live in Brazil and would like to buy the 4 carriage connects cables from the slider board to the main board on Mimaki JV33 printers. Someone would have a reliable website to tell me? I found the site: http://www.digiprint-supplies.com/jv33-hdc-fpc-160-assy-4-pcs-e300541.html

I have a JV33 that is showing error 200, after the subsitituição slider Board and Head Memory, I'm suspecting the Main Board or Head. I put my head in CJV30-130, and shows the error 202, someone could tell me if this head is in trouble. Recalling that she's only 7 months of use.

solve all these problems with the motherboard cleaning, removed, washed with alcohol and clean contacts, I put it back and shows no more errors.

solve all these problems with the motherboard cleaning, removed, washed with alcohol and clean contacts, I put it back and shows no more errors.

solve all these problems with the motherboard cleaning, removed, washed with alcohol and clean contacts, I put it back and shows no more errors.

Mimaki JV33 has shown my many intermittent errors such as Error 120/121 simultaneously, Error 200, the Heat Print is as Break and the media sensor R has difficulty reading. I suggested to cleanse the mother board, removing and washing with isopropyl alcohol. Could someone tell me whether it will...

thank you. I washed the plate with 98% alcohol (isopropyl), then clean contacts. He returned to answer and sooner or later the error. I got a card to test, post the result then.

I have a Mimaki JV33, sometimes show Error 200 but after switching off and on again worked. At the time the error 200 returned and can not longer use the machine. According to the Maintenence manual recommends the following tips: 1. check the head memory cable 2. replace the headmemory 3...

thank you so much!

Yes, MuhammadOsta thank you. With manual can search where it is located.