Recent content by ss5520

Had the exact problem last week, replace head #6 and move on, not worth your time to keep on working with the printhead.

The easiest way I think that can be done is mount the vinyl on an ACM sheet, channel route the backside create the folds and make a box.

No, if you are going to do if what I imagine a through cut to be a perf, you need to set a condition with more force so that it cuts the backer. Use one condition for perfing and another for kisscutting. The only think that moving the blade in the holder is doing is moving the position of the...

This is how we calibrate our blade. We first adjust the blade outside of the holder, fold the label material and try cutting by hand such that it goes only through the label and the backer and doesn't cut the next. We adjust it turning the knob on the holder. Then you place it in the blade...

I bought a machine from Cutworx and Jim Church made the delivery and installation. Had a good experience with him. Sorry you had a bad one.

I would contact Graphtec Tech Support. They are pretty good at responding by email on support. Might take them a few days, but the usually answer.

That setup that you have is very simple to use if you have a Graphtec that can read registration marks, I don't see why you could not call anybody here and give you a 5-10 min description on the setup (you can call me if you want). Be prepared to do some sample prints and loose some material...

Apart from laminating with optically clear you also need to make certain you use 50/50 hole pattern for cars.

The price I was looking at for Sinocolor Pro model was $14,000 with Epson i1600 heads, the one i am looking at from Jucolor $17,250, with 4 Ricoh G5i heads. Has double the width 3x4', longer lasting heads with 1.4mm drop compared to 8mm and print height of 20" compared to 5".

I have been researching machines of this type and was going to get that same machine till I saw bad reviews of support. Now looking at Jucolor, and have seen they give very good support on Facebook. I am now considering their 9012 unit with 4 print heads Ricoh 5Gi. I have asked them many...

No need for union.

I would appreciate if you could send me his information so that I can give him a call, at least to see what he would charge me. Would be good if he had experience in this kind of assembly. It is simple if you have done it before. Should not take more that a couple of hours work. it will be 1...

Is there anybody in or near Fort Washington, Maryland? Need to have a booth assembled and disassembled at end of convention, it will be at the Gaylord National Resort & Convention Center. National Harbor, MD. Assembly needs to be done on May 14th and disassembly on May 17th. Work would entail...

Thanks for the leads, I have contacted both of them. Lets see what they say. Thanks. BTW, no idea where we got the ruler, we have had it for years. Maybe online.

Can somebody recommenda source for doing 2 of these signs. Gemini and Matthews cannot do them. I have attached pictures of how they look. They are constructed of 1/4" thick aluminum. Frame is 24" in Diameter and 3" wide. We can do the wood part if needed, just need the metal circle with base...