Recent content by tgpros

I cant do the limit init because when it is measuring the distance back in the second stage because the motor is bad. It keeps erroring out with 0010 or 0040 before the init can complete. So therefore I can't turn the machine on. It just won't park the heads in maintencenmode because it 101s...

How long is it safe to leave heads of a SP540v manually capped/locked and soaking in solvent cleaner? I cannot get printer into maintenence mode and a tech is probably a week out. Dont want to dry up my heads but dont want to ruin with all that damn solvent cleaner either. Advice PRETTY...

How long is it safe to leave the heads capped with the cleaning solution like that? How long is it safe to leave the heads capped with the cleaning solution like that? A tech wont be able to look at it til at least next week.

I can manually raise them in the service mode.... What I want to know is SHOULD i manually raise them and should i fill with cleaning fluid first? My fluid seems to be draining out. What now?

Forgot to say Roland SP-540v Forgot to say Roland SP-540v

101 It cant turn on because it 101 errors (limit initilize) and it cant limit initilize because every time you do it errors out.

Yes yes it cant do its normal startup because it scan motor errors before it can complete on turn on.

I am having scan motor error 0010 and 0040, so I cannot get the head to lock. I am worried that if the head wont lock and the caps wont rise to meet the heads that over the week or two we might be down the heads might get ruined. If you cant get the machine to automatically lock into a...

SSDD. I am having the same issue and have done the same recovery steps Same issue here. The print head seems to shudder a little while moving but still moves freely whenever I do the limit initilization. Will print for a second or a minute and then stop. Someone please respond before we...

That sounds about right. It runs until the reservoir is depleted. It is sitting as level as our building will allow. Which is to say probably 90-95% is that something that I should replace or is their a chance the filter needs to be cleaned? i have a service manual but if someone has a...

Since it is a shared head though with 2 colors if it is a captop wouldn't both colors be affected and not just the black???

I thought captops were same as dampers? Difference?

We have a sp-540 that has been very reliable until recently. It has stopped printing black until you suck some more ink through on the pump side to reprime. We have had the following problems with the black: A couple months back out vendor accidentally supplied us with a exo sol max 2...