• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
R

randya

New Member From Arizona
Joined
Last seen
Messages
2,060
Reaction score
3
Points
38

Profile posts Latest activity Postings About

  • copythat
    Hey my Mutoh Guru. What can cause some much ink to be left in the cartridges. I've wondering if it's the new cases.

    Thanks in advance.


    Tommy
    M
    Hi Randya:
    I need help with my Mutoh.
    I changed the dampers in my Mutoh valueJet 1604 and now my printhead is not printing.
    I suck with a syringe to the dampers and still no printing.
    I think is not vacuum ink through the lines colors.
    I hope you can help me.
    Thank you
    A
    hey randy
    i have problem at the machine value jet 1604 W1 , an error called "E080ERR JUNCTION".
    i was print very good and i switch off the machine , when i switch on the machine about 5 hours , it's give me an this error , i cleaned the rail by graisse and i cleaned the rastrer , and i checked the main board and controller board and junction board without result.
    ps: when i switch n the machine about 5 hours or higher the machine it's initailized and cleaned and about 1 mintute it's give this error , after when iswitch off and on the machine it's give me the error about 8secnd after intialized.
    ps: i have sublimation value jet 1604 W1
    please help me.
    BadAss
    Hey Randy,
    This is Mykel. We are the ones moving our 1604 tomorrow and I wanted to see if you could let us know what to do and we could move it during the day so that when you come by you could just come to the new shop and make sure it was good to go. I don't know if Sue has called you yet or not. But I don't want to have to waste to much of your time. If we can get it moved during the day then it would be easier and less time consuming for you. Let me know,,,Thanx,,,Mykel
    S
    randa i was told you could help me. I'm replacing the maintenance station and i unpluged the ribbon running to the motherboard and am not sure if i pluged it in right. i posted a picture its in a thread under Falcon Outdoor Problem thanks.
    Compilla
    Hey Randy,

    Can I use cleaning cartridges that are 17 months old if they have never
    been opened?
    letterman7
    Good afternoon, Randy! I finally took the plunge with a refurb'd 1204, and so far have been impressed with the capabilities. My question to you is about service contracts where a tech would be able to come out to...well..service the machine should it need it. I know GEI will do that, but they quoted my such an exorbitant number for my previous Falcon Jr. that I'd like to find someone else (and local to Philadelphia area). Is there anyone that you might recommend that Mutoh has a good relationship with?
    Thanks,
    Rick
    J
    hey Randy. You seem to know so much. yesterday we posted a problem about our falcon outdoor junior only printing black and your answer fixed that problem. I thought maybe you can help us with another. Any design we print the colors are ok but the black looks purple and is very light. We have tried several different profile. We are running on the flexi 8.1. Any advice would be greatly appreciated.
    A
    Randy,
    I have a FAlcon outdoor 48" labeled PrismJet Extra But it only seems to recognize Mutoh ink cartridges because of the inside mechanism. I have the sticker but the original cartridges have little nubs in the front that allows the printer to recognize them. Do you know hif it can be disabled?
    Thanks
    BadAss
    Randy,
    We are having serious issues with our 1604. When it first started we called Chuck from repair and left several messages over a month or so. He never got back with us and our warrenty is expired. We want to get an extended warrenty, but with the problems we had and no response it is frustrating. We constantly get PF errors and it looks like tire tracks randomly all over the prints. I just wanted to give you some info. I know the boss is trying to contact Chuck again and she may call you as well. So just thought I would jump on here and give you notice...Thanx,,Mykel 480-766-9869
    signhere
    Hi Randy it's steve from VGI. I am getting that err 74 message and won't let me print. could you call the shop in the a.m. to advise.thanks
    Espartaco1967
    Hello Dear Randia not print head color in the test way print, before towards without connecting to the PC, and imprimia, I do not include/understand the one of the three lights under the key quality, must be caught three lights or only one
  • Loading…
  • Loading…
  • Loading…
Top