Search results

I can give you the info for our tool that is comparable. With router your size run the 1/4" compression bit 20,000 RPM at 250 IPM, 2 passes, conventional cut. Hope this helps. Josh

Wesley, I would use a 1/4" or 3/8" compression bit. This will give you a clean top and bottom finish. The thing with compression bit is that you have to run it at a high feed rate so tool does not get hot. When the tool gets hot it will dull quickly. What tools do you have? How thick is...

Wesley, Do you still need help with feeds and speed for your router? I work for a tool mfg and can would like to help. https://www.xedgetools.com/x-edge-store/ROUTER-BITS-c49357169 What size is your spindle and do you have a tool changer? Best regards, Josh

Marty, I work for X-Edge Products. I would recommend our Matrix Mat https://www.xedgetools.com/x-edge-store/MATRIX-MAT-UNDERLAY-c46740521 This will greatly increase hold by not allow the part to kick out. I would also recommend out viper down cut. Let me know if you have any questions. I...

WOW, This came out great!!! Good job.

Most CNC shops use a medium or high flow pump that pulls vacuum through the spoilboard giving you your hold down. With Liquid-X you do not use enough mist to ever make it to the pump. The spoilboard will absorb some of the lubricant but very little. When using mist you will need to mill your...

Yes I have done both. Cold air works okay, But not good as using some coolants. I work for X-Edge Products we offer a coolant call Liquid X. This is an alcohol base coolant designed to be uses in a misting system. With it being alcohol base mist, you use less off it making it easier to clean...