Search results

Welcome Hello and a warm welcome from all of us here at Summa!

Good morning everyone and happy new year! I have some good news for those who missed out on the demo S2 cutters that were available last month. We have decided to start 2016 off with a great promotional offer on our S2 cutters. The promotional rebates vary depending on the model, so please give...

Hi Splizaat, As previously mentioned, Winplot would be something to try. It is a free windows based cutting program that links up with CorelDraw via a plug-in. As Kottwitz pointed out it is not the most feature rich cutting program, but it will get the job done without much setup/fiddling...

Hi Kre8r, Although it is possible to raise the height of the tool, we do not recommend doing so because it can affect the cut quality. The better solution to this problem would be to add an additional pinch wheel or perhaps more than one depending on how much a pucker there is in the...

Hello Everyone, Just wanted to thank everyone for their replies and let everyone know that the two S2's have been purchased. For those that still need cutters we have decided to extend special year end pricing on our S2 models(54" and 64") for Signs101 members. Please give us a call at...

You're very welcome, Gary! We appreciate your business and are looking forward to working with you! Best regards, Phil Johnson Summa Inc.

Good morning and happy holidays to everyone! I just wanted to let everyone know that we just recently added a couple demo model S2 tangential cutters that are available at special year end pricing. If you would like additional information and pricing on the units please email me directly at...

Hi Acceleratedgraphics, When cutting circles using the flex cut feature I would typically shorten up my gap distances between tabs(full pressure length) and also shorten the width of the tabs(flex length) themselves. I would use something like 2mm for my full pressure length and 0.5mm for my...

Hi Pete, Sorry to hear that the FSM process didn't do the trick. It's always sad to see an old Summa hit the recycling center, but I understand considering the circumstances. Let me know if you might be interested in getting another Summa in the future and I would be happy to try and get you...

Hello PJ101mn, Sorry to hear about the issues with the D60U. The first thing I would try is to FSM the cutter, if possible(you may not be able to access this if the mainboard is defective). To FSM the cutter you simply hold down the left and right arrow keys as well as the enter key when the...

Hi Artofacks1, I have seen you post that you have reached out in the past for samples in the past and I know I have offered to print these for you. I would like to extend that invitation again if you would like to see some prints and would be happy to print them for you right away. If you...

I would also give Substance a look as well. They have a line called Ultracurve that has the high tack adhesive designed to stick to the low energy plastics. Here's a link - http://www.substanceincorporated.com/category/mx Best regards, Phil Johnson Summa Inc.

Welcome Hello and a warm welcome from all of us here at Summa!

Hi Sleepyeyed, I would be happy to run a test on our machines if you would like. I have cut similar retroreflective materials in the past without problems, so I would think we would be able to offer better results than what you are currently getting with your Mimaki. Please email me at...

Hi Signspot, The issue with the USB to network adapters is that they typically cannot assign a static IP address so there would be no way to tell the Winplot or CoCut software which of the two devices you would like to send the job to. If you could connect one of the two plotters as a USB...

Hello everyone, Good morning, I hope everyone had a great weekend! As most of you probably already know, the SGIA Expo in Atlanta is drawing close and I wanted to provide everyone with our booth information as well as a link where you can redeem a free show pass. Our booth number at SGIA will...

Just Two Days Remaining Hello Everyone, Good morning, I hope everyone is having a great week! I just wanted to remind everyone that our Summer Sales Event is going to be coming to an end tomorrow, but there is still time to take advantage of the savings. We have special pricing on all new...

Welcome Hello and a warm welcome to Signs101!

Welcome Hello and a warm welcome from all of us here at Summa!

Welcome Hello and a warm welcome from all of us here at Summa!