Search results

was there curl to your laminated vinyl before install? maybe too much tension when laminating.

there's nothing bad to say about this printer. Epson sure colors have the best IQ at this price. This is a single head 4/c and will be great for everything you throw at it. We added a second for everyday use. They run in 4/p all the time. I would upgrade to a full version of onyx when you get a...

Ahh s70 the original 30 50 70 were prone to this if your R2R has not been calibrated properly. Most times they were not. It does not show on all media, but this might be one of them. Other item to check is the media profile that you created on the printer. You probably need a specific one due to...

What media? What heater settings? If media is older, wipe area with alcohol, mark with sharpie and print see if the cleaned area prints better. If so bag the roll for a new one. If temps of profile are set high, and printing in a cooler room, the heaters may not be keeping up with prepping...

So RGB is a larger color space and what we use to view images on a monitor…millions of colors. Printing is done through cmyk, mixing colors to make thousands of colors. Do all of your design in rgb. Give your rip the most possible colors. It will convert to cmyk and give you the widest gamut...

I would not splice this. The weight will probably cause it to fail. Just outsource it.

Sounds like your safety sensor or your pressure sensor. You should find a tech and have him perform a pm service. Make sure they have magnetic pressure gauges.

Fantastic

If your edges are curling you have too much tension when laminating…less is more. If you can laminate with zero tension, it would be ideal

I just put in a 30F it is a monster

It’s a 10k printer best bang for the buck. You will be fine

If you are looking for color consistency and panel to panel line up the Epson sure color is the way to go. The s40 is the best bang for the buck. I love HP. The iq is better on 300 series than the 700-800. There are a lot of people working through issues with their printers. HP will fix them but...

You are

You are going to hate canon

Possible blade not installed correctly in carriage. There is a calibration you can do as well.

Colex can recognize edges of board…do some digging in the manual for set up.

Save as high res pdf from illustrator…you need to manually make a shape that you want to cut in illustrator…the only thing onyx ill do is add document box as cut file.

R series is a whole different class of printer…no to 700/800 absolute=tely to epson SURECOLOR…s40 60 or 80

Don’t honk you can use cut sheets on Roland…you can get a Neolithic rotary trimmer and trim each one individually, you can buy a fotobo and print a full roll cut a full roll or a CNBC to do the same…what’s your budget..what other work do you do..

Are you printing same file formats in both rips? What format? The issue may be the way illustrator is saving. Or, more than likely profile mismatch. Media used? Profile used? You can technically use any profile on any media…doesn’t mean you should.